OK, in your apache2.conf there seems to be nothing wrong, I see that it has a couple of relevant includes: conf-ebabled/*.conf sites-enebaled/*.conf mod_perl should be in the conf-enabled. And the site configuration should be in the sites-enabled. LedgerSMB does not support mod_perl (I don't think it ever has, but someone who's been more involved would better answer that). mod_perl is an Apache module which runs certain types of Perl applications, but unless the application is properly designed to use it, there can be a lot of issues with it. I *think* it needs to be run as a "simple" cgi bin. It's what I'm doing on my Gentoo box, (via a ScriptAlias). Jigme Datse Yli-Rasku On 2016-11-09 16:00, RODRIGUEZ FONSECA JORGE ALBERTO wrote: > Hi: > > Thank very much you for your help. > > I don't know what is : mod_perl process...I only did this steps: > > a) Add ppa to my repository (Ubuntu 16.04.1) > b) Did process Update and Upgrade (in terminal) and it update to the > version 1.4.33 > c) I installed it from Ubuntu repostory (with Synaptic). I can say what > kid of programs installed Ubuntu for LedgerSMB (In this case mod_perl) > d) I run http://localhost/ledgersmb/setup.pl on the browser and got the > problem that I comment before (My last e-mail) > e) Other day I did again the process Update and Upgrade as before (Point > b) and it update to the versión 1.4.34 > f) I run http://localhost/ledgersmb/setup.pl again and got the same > problem already commented. > > As you request, I have this link to view the apache configuration file > of my Os Ubuntu: > > https://dl.dropboxusercontent.com/u/58767921/apache2.conf > > Then following your instructions, I run: perl -c setup.pl > <http://setup.pl>in terminal (in the place where LedgerSMB is), and get > this message: > > 'setup.pl syntax OK' > > I think this would be useful: > > Program installed: > https://dl.dropboxusercontent.com/u/58767921/Programs%20installed.tar.gz > Program outbuildings: > https://dl.dropboxusercontent.com/u/58767921/outbuildings.tar.gz > > I use a compress file format .tar.gz, but if necessary I would use other > format. > > I hope this information help, > > Regards, > > Jorge Rodríguez > > > ------------------------------------------------------------------------ > *From: *"Erik Huelsmann" <..hidden..> > *To: *"ledger-smb-users lists.sourceforge.net" > <..hidden..> > *Sent: *Wednesday, November 9, 2016 5:16:43 PM > *Subject: *Re: [Ledger-smb-users] Updating request of help > > Hi, > > > > At first I want to excuse if my english isn't clear, but it is > because it isn't my native language. I did as well as I could. > > > No need to appologize. Your english is definitely good enough to explain > your problem! > > > > Some days before, I request if would one help to run LedgerSMB in my > Os Ubuntu 14.04-1 LTS. Now with ppa I have installed LedgerSMB > 1.4.34. To remember my problem, when I run on the browser: > http://localhost/ledgersmb/setup.pl, I get this message: > > 500 Internal Server Error: > > Internal Server Error > > The server encountered an internal error or misconfiguration and was > unable to complete your request. > > Please contact the server administrator at webmaster@localhost to > inform them of the time this error occurred, and the actions you > performed just before this error. > > More information about this error may be available in the server > error log. > Apache/2.4.18 (Ubuntu) Server at localhost Port 80 > > The server error log show this: > > PHP Warning: Module 'mysqlnd' already loaded in Unknown on line 0 > [Wed Nov 09 08:50:09.803926 2016] [mpm_prefork:notice] [pid 1226] > AH00163: Apache/2.4.18 (Ubuntu) mod_perl/2.0.9 Perl/v5.22.1 > configured -- resuming normal operations > > > This indicates you're using mod_perl on the server. Are you trying to > run LedgerSMB under mod_perl? Or do you run a "standard" setup? Can you > send us (a link to) your Apache config so we can understand your > environment better? > > > [Wed Nov 09 08:50:09.804218 2016] [core:notice] [pid 1226] AH00094: > Command line: '/usr/sbin/apache2' > [Wed Nov 09 08:50:10.807878 2016] [:error] [pid 4792] mod_log_sql: > insufficient configuration info to establish database link > [Wed Nov 09 08:50:10.807966 2016] [:error] [pid 4792] mod_log_sql: > child spawned but unable to open database link > [Wed Nov 09 08:50:10.808642 2016] [:error] [pid 4791] mod_log_sql: > insufficient configuration info to establish database link > [Wed Nov 09 08:50:10.808686 2016] [:error] [pid 4791] mod_log_sql: > child spawned but unable to open database link > [Wed Nov 09 08:50:10.809226 2016] [:error] [pid 4793] mod_log_sql: > insufficient configuration info to establish database link > [Wed Nov 09 08:50:10.809266 2016] [:error] [pid 4793] mod_log_sql: > child spawned but unable to open database link > [Wed Nov 09 08:50:10.810392 2016] [:error] [pid 4794] mod_log_sql: > insufficient configuration info to establish database link > [Wed Nov 09 08:50:10.811456 2016] [core:notice] [pid 1226] AH00051: > child pid 1237 exit signal Segmentation fault (11), possible > coredump in /etc/apache2 > [Wed Nov 09 08:50:10.811525 2016] [core:notice] [pid 1226] AH00051: > child pid 1238 exit signal Segmentation fault (11), possible > coredump in /etc/apache2 > [Wed Nov 09 08:50:10.811542 2016] [core:notice] [pid 1226] AH00051: > child pid 1239 exit signal Segmentation fault (11), possible > coredump in /etc/apache2 > [Wed Nov 09 08:50:10.811558 2016] [core:notice] [pid 1226] AH00051: > child pid 1240 exit signal Segmentation fault (11), possible > coredump in /etc/apache2 > [Wed Nov 09 08:50:10.811574 2016] [core:notice] [pid 1226] AH00051: > child pid 1241 exit signal Segmentation fault (11), possible > coredump in /etc/apache2 > [Wed Nov 09 08:50:10.810448 2016] [:error] [pid 4794] mod_log_sql: > child spawned but unable to open database link > [Wed Nov 09 08:50:10.812286 2016] [:error] [pid 4795] mod_log_sql: > insufficient configuration info to establish database link > [Wed Nov 09 08:50:10.812317 2016] [:error] [pid 4795] mod_log_sql: > child spawned but unable to open database link > [Wed Nov 09 13:57:01.289696 2016] [:error] [pid 1060] mod_log_sql: > insufficient configuration info to establish database link > [Wed Nov 09 13:57:01.372054 2016] [:error] [pid 1060] mod_log_sql: > child spawned but unable to open database link > [Wed Nov 09 13:57:38.091950 2016] [cgi:error] [pid 4791] [client > 127.0.0.1:35408 <http://127.0.0.1:35408>] End of script output > before headers: setup.pl <http://setup.pl> > > > Ok. I'm not completely familiar with the PPA, but could you run 'perl -c > setup.pl <http://setup.pl>' from the directory that 'setup.pl > <http://setup.pl>' script is located in? What's the output when you do > that? > > > > The Access log show this: > > 127.0.0.1 - - [09/Nov/2016:13:57:33 -0600] "GET /ledgersmb/setup.pl > <http://setup.pl> HTTP/1.1" 500 799 "-" "Mozilla/5.0 (X11; Ubuntu; > Linux x86_64; rv:49.0) Gecko/20100101 Firefox/49.0" > > Would someone help me please, > > > I'm aware this isn't much help yet, but with some back-and-forth to > learn about your setup, I think we'll get there. > > > Regards, > > > -- > Bye, > > Erik. > > http://efficito.com <http://efficito.com/> -- Hosted accounting and ERP. > Robust and Flexible. No vendor lock-in. > > ------------------------------------------------------------------------------ > Developer Access Program for Intel Xeon Phi Processors > Access to Intel Xeon Phi processor-based developer platforms. > With one year of Intel Parallel Studio XE. > Training and support from Colfax. > Order your platform today. http://sdm.link/xeonphi > _______________________________________________ > Ledger-smb-users mailing list > ..hidden.. > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > > > ------------------------------------------------------------------------------ > Developer Access Program for Intel Xeon Phi Processors > Access to Intel Xeon Phi processor-based developer platforms. > With one year of Intel Parallel Studio XE. > Training and support from Colfax. > Order your platform today. http://sdm.link/xeonphi > > > > _______________________________________________ > Ledger-smb-users mailing list > ..hidden.. > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > -- Jigme Datse Yli-Rasku ..hidden.. (Preferred address for new messages) 250-505-6117 Jigme Datse Yli-Rasku PO Box 270 Rossland, BC V0G 1Y0 Canada ....................................................................... ... This message should be electronically signed, and if the sender ... ... has your public key, may also be encrypted. ... ... If you have any questions about this, please email, or call. ... ... ... ... Note, unknown calls likely will go to voicemail. ... ... Please leave a message if you get voicemail. ... .......................................................................
Attachment:
signature.asc
Description: OpenPGP digital signature
------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi
_______________________________________________ Ledger-smb-users mailing list ..hidden.. https://lists.sourceforge.net/lists/listinfo/ledger-smb-users