[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: need a little help installing perl module perl-Config-Std for F18 install of ledgersmb-1.3.29



It just doesn't get to work.
It *keeps* complaining that it can't find Config::Std.

I don't know enough of perl and of lsmb to solve this.
But o.t.o.h. I feel it shouldn't be as hard as it is now to install lsmb
in F18, should it?

ario



On Sun, 2013-02-03 at 11:11 +0000, ario wrote:
> After installing the perl-Config-Std from wieers' repository, and I dig
> into some perl subdirectory, I found the following line inside some 
> Config/Std/Setting (or so):
> 
> "From cpan.org"
> 
> That must explain why it still doesnt what it should.
> 
> Hold on, I'm still 'playing' with:
> 
> export PERL_MM_OPT="BASE_INSTALL=/usr/lib64/perl5";
> 
> in /etc/bashrc, then restart (I think with my x86_64 it should be lib64,
> no?), and
> 
> $ sudo yum install cpan 
> 
> AND THAT is where the environment is set to /root/perl5 in /root/.bashrc
> (if one answers thoughtlessly [yes] where it asks about it.
> I think I could type [yes] there, but then immediately have to replace
> /root/perl5 with /usr/lib64/perl5
> 
> correct?
> 
> Then
> 
> $ sudo cpan App::cpanminus
> 
> (so the perl 'system' will take care of dependencies).
> 
> and then the cpanm
> 
> $ sudo cpanm Config::Std
> 
> I'll post the result.
> 
> 
> ario
> 
> 
> 
> On Sun, 2013-02-03 at 01:33 -0800, Chris Travers wrote:
> > 
> > 
> > On Sat, Feb 2, 2013 at 7:42 AM, ario <..hidden..>
> > wrote:
> >         Ok, so I got a new VM with Fedora 18 minimal install on it,
> >         and after
> >         getting a copy of ledgersmb-1.3.29-1.noarch.rpm and to prevent
> >         any
> >         mismatch with CPAN I didn't use it altogether, but instead
> >         did:
> > 
> > 
> > Ok, so the best  
> >         
> >         $ sudo yum install mlocate perl perl-Class-Std
> >         perl-ExtUtils-MakeMaker
> >         perl-Test-Base perl-Test-Pod perl-Test-Pod-Coverage tar
> >         
> >         Get repoforge's perl-Config-Std:
> >         $ curl
> >         http://apt.sw.be/source/perl-Config-Std-0.900-1.rf.src.rpm --O
> >         perl-Config-Std-0.900-1.rf.src.rpm
> >         
> >         $ rpm -Uvh perl-Config-Std-0.900-1.rf.src.rpm
> >         $ cd rpmbuild/SOURCES/
> >         $ tar xzf Config-Std-0.900-1.tar.gz
> >         $ cd Config-Std-0.900
> >         $ Makefile.PL
> >         $ make
> >         $ make test
> >         $ sudo make install
> >         
> >         
> >         $ cd ~
> >         $ sudo yum localinstall ledgersmb-1.3.29-1.noarch.rpm
> >         
> >         
> >         Then, still it says: Error: ... Requires: perl-Config-Std
> >         even where '$ make test' terminated succesfully.
> > 
> > 
> > 
> > 
> > Hmmm....  so rpm -q perl-Config-Std shows that it is installed but yum
> > won't find it?
> > 
> > 
> > Best Wishes,
> > Chris Travers 
> >         
> >         
> >         
> >         
> >         
> >         
> >         On Sat, 2013-02-02 at 14:04 +0000, ario wrote:
> >         > On Thu, 2013-01-31 at 00:10 -0800, Chris Travers wrote:
> >         > >
> >         > >
> >         > > On Wed, Jan 30, 2013 at 9:45 AM, ario
> >         <..hidden..>
> >         > > wrote:
> >         > >         because I can't find it.
> >         > >
> >         > >         http://ledgersmb.org/download says: Enable the
> >         EPEL
> >         > >         repository, but I
> >         > >         guess this only applies if one wants to install to
> >         RHEL and
> >         > >         its flavors
> >         > >         CentOS & Scientific Linux.
> >         > >
> >         > >         Installing via cpan's cpanm results in that the
> >         module
> >         > >         (perl-Config-Std)
> >         > >         isn't found by the rpm.
> >         > >
> >         > >
> >         > > Yes, what actually happens is that it gets installed in
> >         the local root
> >         > > path.
> >         > >
> >         > >
> >         > > The first thing you will have to do is get rid of it where
> >         it is
> >         > >
> >         > >
> >         > > for example
> >         > >
> >         > >
> >         > > printenv | grep  PERL_MM_OPT
> >         >
> >         > returns an empty string
> >         >
> >         > So I thought let's install 'dag wieers'
> >         >
> >         http://pkgs.repoforge.org/perl-Config-Std/perl-Config-Std-0.900-1.rf.src.rpm
> >         > which claims to be distro-independent.
> >         >
> >         > Then
> >         >
> >         > $ sudo rpm -Uvh it, then tar xzg the
> >         perl-Config-Std-0.900.tar.gz file
> >         >
> >         > run
> >         >
> >         > $ perl Makefile.PL
> >         > $ make
> >         > $ make test
> >         > $ sudo make install
> >         > and then
> >         > $ sudo yum localinstall ledgersmb-1.3.29-1.noarch.rpm
> >         >
> >         > But still it's complaining there is no perl-Config-Std
> >         >
> >         > bummer... what now?
> >         >
> >         >
> >         > > Then delete that directory.
> >         > >
> >         > >
> >         > > Then
> >         > >
> >         > >
> >         > > PERL_MM_OPT=INSTALL_BASE=/usr/lib/perl5 cpan Config::Std
> >         > >
> >         > >
> >         > > and the rest.....
> >         > >
> >         > >
> >         > > Best wishes,
> >         > > Chris Travers
> >         > >
> >         > >         A 'regular' Fedora 18 rpm for perl-Config-Std
> >         doesn't show up
> >         > >         in Google.
> >         > >
> >         > >         Any hints?
> >         > >
> >         > >
> >         > >         thanks,
> >         > >         ario
> >         > >
> >         > >
> >         > >
> >         > >
> >         ------------------------------------------------------------------------------
> >         > >         Everyone hates slow websites. So do we.
> >         > >         Make your web apps faster with AppDynamics
> >         > >         Download AppDynamics Lite for free today:
> >         > >         http://p.sf.net/sfu/appdyn_d2d_jan
> >         > >         _______________________________________________
> >         > >         Ledger-smb-users mailing list
> >         > >         ..hidden..
> >         > >
> >         https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> >         > >
> >         > >
> >         ------------------------------------------------------------------------------
> >         > > Everyone hates slow websites. So do we.
> >         > > Make your web apps faster with AppDynamics
> >         > > Download AppDynamics Lite for free today:
> >         > > http://p.sf.net/sfu/appdyn_d2d_jan
> >         > > _______________________________________________
> >         Ledger-smb-users mailing list
> >         ..hidden..
> >         https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> >         >
> >         >
> >         >
> >         >
> >         ------------------------------------------------------------------------------
> >         > Everyone hates slow websites. So do we.
> >         > Make your web apps faster with AppDynamics
> >         > Download AppDynamics Lite for free today:
> >         > http://p.sf.net/sfu/appdyn_d2d_jan
> >         > _______________________________________________
> >         > Ledger-smb-users mailing list
> >         > ..hidden..
> >         >
> >         https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> >         
> >         
> >         
> >         ------------------------------------------------------------------------------
> >         Everyone hates slow websites. So do we.
> >         Make your web apps faster with AppDynamics
> >         Download AppDynamics Lite for free today:
> >         http://p.sf.net/sfu/appdyn_d2d_jan
> >         _______________________________________________
> >         Ledger-smb-users mailing list
> >         ..hidden..
> >         https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> >         
> > 
> > ------------------------------------------------------------------------------
> > Everyone hates slow websites. So do we.
> > Make your web apps faster with AppDynamics
> > Download AppDynamics Lite for free today:
> > http://p.sf.net/sfu/appdyn_d2d_jan
> > _______________________________________________ Ledger-smb-users mailing list ..hidden.. https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> 



------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_jan
_______________________________________________
Ledger-smb-users mailing list
..hidden..
https://lists.sourceforge.net/lists/listinfo/ledger-smb-users