[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
correction Re: need a little help installing perl module perl-Config-Std for F18 install of ledgersmb-1.3.29
- Subject: correction Re: need a little help installing perl module perl-Config-Std for F18 install of ledgersmb-1.3.29
- From: ario <..hidden..>
- Date: Sun, 03 Feb 2013 11:13:56 +0000
On Sun, 2013-02-03 at 11:11 +0000, ario wrote:
> After installing the perl-Config-Std from wieers' repository, and I dig
> into some perl subdirectory, I found the following line inside some
> Config/Std/Setting (or so):
>
> "From cpan.org"
>
> That must explain why it still doesnt what it should.
>
> Hold on, I'm still 'playing' with:
>
> export PERL_MM_OPT="BASE_INSTALL=/usr/lib64/perl5";
>
> in /etc/bashrc,
Which is incorrect, see below...
ario
> then restart (I think with my x86_64 it should be lib64,
> no?), and
>
> $ sudo yum install cpan
>
> AND THAT is where the environment is set to /root/perl5 in /root/.bashrc
> (if one answers thoughtlessly [yes] where it asks about it.
> I think I could type [yes] there, but then immediately have to replace
> /root/perl5 with /usr/lib64/perl5
>
> correct?
>
> Then
>
> $ sudo cpan App::cpanminus
>
> (so the perl 'system' will take care of dependencies).
>
> and then the cpanm
>
> $ sudo cpanm Config::Std
>
> I'll post the result.
>
>
> ario
>
>
>
> On Sun, 2013-02-03 at 01:33 -0800, Chris Travers wrote:
> >
> >
> > On Sat, Feb 2, 2013 at 7:42 AM, ario <..hidden..>
> > wrote:
> > Ok, so I got a new VM with Fedora 18 minimal install on it,
> > and after
> > getting a copy of ledgersmb-1.3.29-1.noarch.rpm and to prevent
> > any
> > mismatch with CPAN I didn't use it altogether, but instead
> > did:
> >
> >
> > Ok, so the best
> >
> > $ sudo yum install mlocate perl perl-Class-Std
> > perl-ExtUtils-MakeMaker
> > perl-Test-Base perl-Test-Pod perl-Test-Pod-Coverage tar
> >
> > Get repoforge's perl-Config-Std:
> > $ curl
> > http://apt.sw.be/source/perl-Config-Std-0.900-1.rf.src.rpm --O
> > perl-Config-Std-0.900-1.rf.src.rpm
> >
> > $ rpm -Uvh perl-Config-Std-0.900-1.rf.src.rpm
> > $ cd rpmbuild/SOURCES/
> > $ tar xzf Config-Std-0.900-1.tar.gz
> > $ cd Config-Std-0.900
> > $ Makefile.PL
> > $ make
> > $ make test
> > $ sudo make install
> >
> >
> > $ cd ~
> > $ sudo yum localinstall ledgersmb-1.3.29-1.noarch.rpm
> >
> >
> > Then, still it says: Error: ... Requires: perl-Config-Std
> > even where '$ make test' terminated succesfully.
> >
> >
> >
> >
> > Hmmm.... so rpm -q perl-Config-Std shows that it is installed but yum
> > won't find it?
> >
> >
> > Best Wishes,
> > Chris Travers
> >
> >
> >
> >
> >
> >
> > On Sat, 2013-02-02 at 14:04 +0000, ario wrote:
> > > On Thu, 2013-01-31 at 00:10 -0800, Chris Travers wrote:
> > > >
> > > >
> > > > On Wed, Jan 30, 2013 at 9:45 AM, ario
> > <..hidden..>
> > > > wrote:
> > > > because I can't find it.
> > > >
> > > > http://ledgersmb.org/download says: Enable the
> > EPEL
> > > > repository, but I
> > > > guess this only applies if one wants to install to
> > RHEL and
> > > > its flavors
> > > > CentOS & Scientific Linux.
> > > >
> > > > Installing via cpan's cpanm results in that the
> > module
> > > > (perl-Config-Std)
> > > > isn't found by the rpm.
> > > >
> > > >
> > > > Yes, what actually happens is that it gets installed in
> > the local root
> > > > path.
> > > >
> > > >
> > > > The first thing you will have to do is get rid of it where
> > it is
> > > >
> > > >
> > > > for example
> > > >
> > > >
> > > > printenv | grep PERL_MM_OPT
> > >
> > > returns an empty string
> > >
> > > So I thought let's install 'dag wieers'
> > >
> > http://pkgs.repoforge.org/perl-Config-Std/perl-Config-Std-0.900-1.rf.src.rpm
> > > which claims to be distro-independent.
> > >
> > > Then
> > >
> > > $ sudo rpm -Uvh it, then tar xzg the
> > perl-Config-Std-0.900.tar.gz file
> > >
> > > run
> > >
> > > $ perl Makefile.PL
> > > $ make
> > > $ make test
> > > $ sudo make install
> > > and then
> > > $ sudo yum localinstall ledgersmb-1.3.29-1.noarch.rpm
> > >
> > > But still it's complaining there is no perl-Config-Std
> > >
> > > bummer... what now?
> > >
> > >
> > > > Then delete that directory.
> > > >
> > > >
> > > > Then
> > > >
> > > >
> > > > PERL_MM_OPT=INSTALL_BASE=/usr/lib/perl5 cpan Config::Std
> > > >
> > > >
> > > > and the rest.....
> > > >
> > > >
> > > > Best wishes,
> > > > Chris Travers
> > > >
> > > > A 'regular' Fedora 18 rpm for perl-Config-Std
> > doesn't show up
> > > > in Google.
> > > >
> > > > Any hints?
> > > >
> > > >
> > > > thanks,
> > > > ario
> > > >
> > > >
> > > >
> > > >
> > ------------------------------------------------------------------------------
> > > > Everyone hates slow websites. So do we.
> > > > Make your web apps faster with AppDynamics
> > > > Download AppDynamics Lite for free today:
> > > > http://p.sf.net/sfu/appdyn_d2d_jan
> > > > _______________________________________________
> > > > Ledger-smb-users mailing list
> > > > ..hidden..
> > > >
> > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> > > >
> > > >
> > ------------------------------------------------------------------------------
> > > > Everyone hates slow websites. So do we.
> > > > Make your web apps faster with AppDynamics
> > > > Download AppDynamics Lite for free today:
> > > > http://p.sf.net/sfu/appdyn_d2d_jan
> > > > _______________________________________________
> > Ledger-smb-users mailing list
> > ..hidden..
> > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> > >
> > >
> > >
> > >
> > ------------------------------------------------------------------------------
> > > Everyone hates slow websites. So do we.
> > > Make your web apps faster with AppDynamics
> > > Download AppDynamics Lite for free today:
> > > http://p.sf.net/sfu/appdyn_d2d_jan
> > > _______________________________________________
> > > Ledger-smb-users mailing list
> > > ..hidden..
> > >
> > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> >
> >
> >
> > ------------------------------------------------------------------------------
> > Everyone hates slow websites. So do we.
> > Make your web apps faster with AppDynamics
> > Download AppDynamics Lite for free today:
> > http://p.sf.net/sfu/appdyn_d2d_jan
> > _______________________________________________
> > Ledger-smb-users mailing list
> > ..hidden..
> > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> >
> >
> > ------------------------------------------------------------------------------
> > Everyone hates slow websites. So do we.
> > Make your web apps faster with AppDynamics
> > Download AppDynamics Lite for free today:
> > http://p.sf.net/sfu/appdyn_d2d_jan
> > _______________________________________________ Ledger-smb-users mailing list ..hidden.. https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
>
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_jan
_______________________________________________
Ledger-smb-users mailing list
..hidden..
https://lists.sourceforge.net/lists/listinfo/ledger-smb-users