Re: pos screen posts, but doesn't print

[Bob Miller <..hidden..>]

Chris:
Things are so much easier when you are a genius ;)
As per your suggestion, I have commented the final line in pos.conf.pl referencing the printer, now the contents of the pos template print at the top of the frame, regardless of whether I choose the printer or the screen option.
I am also still getting the unreferenced scalar error, is this related to the printing, or likely it is an error for something else?

-----Original Message-----
From: Chris Travers <..hidden..>
Reply-To: ..hidden..
To: ..hidden..
Subject: Re: [Ledger-smb-users] pos screen posts, but doesn't print
Date: Mon, 30 Jun 2008 11:45:40 -0700

Hi Bob;

Comment out the printer definition in the pos.conf.pl if you want to
use the same settings as your ledgermb.conf.

The major reason for not doing this is that cups takes time to spool,
so if you are spooling on the print server, then spooling on the POS
terminal, you may have some delays.  In that case, you will want to
take a look at the utils/pos directory for the direct to port printing
capabilities.

Best Wishes,
Chris Travers

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Ledger-smb-users mailing list
..hidden..
https://lists.sourceforge.net/lists/listinfo/ledger-smb-users

Bob Miller
334-7117/633-3760
http://computerisms.ca
..hidden..
Network, Internet, Server,
and Open Source Solutions