[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: need a little help installing perl module perl-Config-Std for F18 install of ledgersmb-1.3.29



Yes, 5:

/root/.cpan/build/Config-Std-0.900-Kj061j/blib/lib/Config/Std.pm
/root/.cpan/build/Config-Std-0.900-Kj061j/lib/Config/Std.pm
/root/.cpan/build/Config-Std-0.900-OayslD/blib/lib/Config/Std.pm
/root/.cpan/build/Config-Std-0.900-OayslD/lib/Config/Std.pm
/usr/local/share/perl5/Config/Std.pm

regards


On Mon, 2013-02-04 at 18:03 +0000, Lyle wrote:
> I guessed at that RPM, one might not exist. I always use cpan. Did
> cpan install the module successfully?
> 
> updatedb
> locate Std.pm
> 
> Does it give a folder that has Config/Std.pm?
> 
> 
> Lyle
> 
> On 04/02/2013 16:13, ario wrote:
> 
> > I was trying to install lsmb on an F18 VM.
> > 
> > Now yum install perl-Config-Std didn't work for me because I wasn't able
> > to find *any* F18 repository which would me let install it.
> > 
> > So I tried your 2nd suggestion: cpanm Config::Std but that, even after
> > following the suggestions from this list in this same thread, still
> > resulted in complaints from 
> > yum localinstall ledgersmb-1.3.29-1.noarch.rp
> > saying that it can't find (or rather: needs) Config::Std.
> > 
> > So I'm quite at a loss here, unless you could point me to a
> > F18-repository that contains perl-Config-Std, which would be very
> > welcome.
> > 
> > regards,
> > ario
> > 
> > 
> > On Mon, 2013-02-04 at 14:07 +0000, Lyle wrote:
> > > No, I'm not on F18. But as a Perl programmer I install a lot of Perl
> > > modules.
> > > 
> > > 
> > > Lyle
> > > 
> > > On 04/02/2013 13:42, ario wrote:
> > > 
> > > > Hi Lyle,
> > > > 
> > > > did you actually try that? :)
> > > > 
> > > > regards,
> > > > ario
> > > > 
> > > > 
> > > > On Sun, 2013-02-03 at 16:52 +0000, Lyle wrote:
> > > > > yum perl-Config-Std
> > > > > 
> > > > > failing that
> > > > > 
> > > > > cpan Config::Std
> > > > > 
> > > > > 
> > > > > Lyle
> > > > > 
> > > > > On 03/02/2013 16:28, ario wrote:
> > > > > > It just doesn't get to work.
> > > > > > It *keeps* complaining that it can't find Config::Std.
> > > > > > 
> > > > > > I don't know enough of perl and of lsmb to solve this.
> > > > > > But o.t.o.h. I feel it shouldn't be as hard as it is now to install lsmb
> > > > > > in F18, should it?
> > > > > > 
> > > > > > ario
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > On Sun, 2013-02-03 at 11:11 +0000, ario wrote:
> > > > > > > After installing the perl-Config-Std from wieers' repository, and I dig
> > > > > > > into some perl subdirectory, I found the following line inside some
> > > > > > > Config/Std/Setting (or so):
> > > > > > > 
> > > > > > > "From cpan.org"
> > > > > > > 
> > > > > > > That must explain why it still doesnt what it should.
> > > > > > > 
> > > > > > > Hold on, I'm still 'playing' with:
> > > > > > > 
> > > > > > > export PERL_MM_OPT="BASE_INSTALL=/usr/lib64/perl5";
> > > > > > > 
> > > > > > > in /etc/bashrc, then restart (I think with my x86_64 it should be lib64,
> > > > > > > no?), and
> > > > > > > 
> > > > > > > $ sudo yum install cpan
> > > > > > > 
> > > > > > > AND THAT is where the environment is set to /root/perl5 in /root/.bashrc
> > > > > > > (if one answers thoughtlessly [yes] where it asks about it.
> > > > > > > I think I could type [yes] there, but then immediately have to replace
> > > > > > > /root/perl5 with /usr/lib64/perl5
> > > > > > > 
> > > > > > > correct?
> > > > > > > 
> > > > > > > Then
> > > > > > > 
> > > > > > > $ sudo cpan App::cpanminus
> > > > > > > 
> > > > > > > (so the perl 'system' will take care of dependencies).
> > > > > > > 
> > > > > > > and then the cpanm
> > > > > > > 
> > > > > > > $ sudo cpanm Config::Std
> > > > > > > 
> > > > > > > I'll post the result.
> > > > > > > 
> > > > > > > 
> > > > > > > ario
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > On Sun, 2013-02-03 at 01:33 -0800, Chris Travers wrote:
> > > > > > > > On Sat, Feb 2, 2013 at 7:42 AM, ario <..hidden..>
> > > > > > > > wrote:
> > > > > > > >          Ok, so I got a new VM with Fedora 18 minimal install on it,
> > > > > > > >          and after
> > > > > > > >          getting a copy of ledgersmb-1.3.29-1.noarch.rpm and to prevent
> > > > > > > >          any
> > > > > > > >          mismatch with CPAN I didn't use it altogether, but instead
> > > > > > > >          did:
> > > > > > > > 
> > > > > > > > 
> > > > > > > > Ok, so the best
> > > > > > > >          
> > > > > > > >          $ sudo yum install mlocate perl perl-Class-Std
> > > > > > > >          perl-ExtUtils-MakeMaker
> > > > > > > >          perl-Test-Base perl-Test-Pod perl-Test-Pod-Coverage tar
> > > > > > > >          
> > > > > > > >          Get repoforge's perl-Config-Std:
> > > > > > > >          $ curl
> > > > > > > >          http://apt.sw.be/source/perl-Config-Std-0.900-1.rf.src.rpm --O
> > > > > > > >          perl-Config-Std-0.900-1.rf.src.rpm
> > > > > > > >          
> > > > > > > >          $ rpm -Uvh perl-Config-Std-0.900-1.rf.src.rpm
> > > > > > > >          $ cd rpmbuild/SOURCES/
> > > > > > > >          $ tar xzf Config-Std-0.900-1.tar.gz
> > > > > > > >          $ cd Config-Std-0.900
> > > > > > > >          $ Makefile.PL
> > > > > > > >          $ make
> > > > > > > >          $ make test
> > > > > > > >          $ sudo make install
> > > > > > > >          
> > > > > > > >          
> > > > > > > >          $ cd ~
> > > > > > > >          $ sudo yum localinstall ledgersmb-1.3.29-1.noarch.rpm
> > > > > > > >          
> > > > > > > >          
> > > > > > > >          Then, still it says: Error: ... Requires: perl-Config-Std
> > > > > > > >          even where '$ make test' terminated succesfully.
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > Hmmm....  so rpm -q perl-Config-Std shows that it is installed but yum
> > > > > > > > won't find it?
> > > > > > > > 
> > > > > > > > 
> > > > > > > > Best Wishes,
> > > > > > > > Chris Travers
> > > > > > > >          
> > > > > > > >          
> > > > > > > >          
> > > > > > > >          
> > > > > > > >          
> > > > > > > >          
> > > > > > > >          On Sat, 2013-02-02 at 14:04 +0000, ario wrote:
> > > > > > > >          > On Thu, 2013-01-31 at 00:10 -0800, Chris Travers wrote:
> > > > > > > >          > >
> > > > > > > >          > >
> > > > > > > >          > > On Wed, Jan 30, 2013 at 9:45 AM, ario
> > > > > > > >          <..hidden..>
> > > > > > > >          > > wrote:
> > > > > > > >          > >         because I can't find it.
> > > > > > > >          > >
> > > > > > > >          > >         http://ledgersmb.org/download says: Enable the
> > > > > > > >          EPEL
> > > > > > > >          > >         repository, but I
> > > > > > > >          > >         guess this only applies if one wants to install to
> > > > > > > >          RHEL and
> > > > > > > >          > >         its flavors
> > > > > > > >          > >         CentOS & Scientific Linux.
> > > > > > > >          > >
> > > > > > > >          > >         Installing via cpan's cpanm results in that the
> > > > > > > >          module
> > > > > > > >          > >         (perl-Config-Std)
> > > > > > > >          > >         isn't found by the rpm.
> > > > > > > >          > >
> > > > > > > >          > >
> > > > > > > >          > > Yes, what actually happens is that it gets installed in
> > > > > > > >          the local root
> > > > > > > >          > > path.
> > > > > > > >          > >
> > > > > > > >          > >
> > > > > > > >          > > The first thing you will have to do is get rid of it where
> > > > > > > >          it is
> > > > > > > >          > >
> > > > > > > >          > >
> > > > > > > >          > > for example
> > > > > > > >          > >
> > > > > > > >          > >
> > > > > > > >          > > printenv | grep  PERL_MM_OPT
> > > > > > > >          >
> > > > > > > >          > returns an empty string
> > > > > > > >          >
> > > > > > > >          > So I thought let's install 'dag wieers'
> > > > > > > >          >
> > > > > > > >          http://pkgs.repoforge.org/perl-Config-Std/perl-Config-Std-0.900-1.rf.src.rpm
> > > > > > > >          > which claims to be distro-independent.
> > > > > > > >          >
> > > > > > > >          > Then
> > > > > > > >          >
> > > > > > > >          > $ sudo rpm -Uvh it, then tar xzg the
> > > > > > > >          perl-Config-Std-0.900.tar.gz file
> > > > > > > >          >
> > > > > > > >          > run
> > > > > > > >          >
> > > > > > > >          > $ perl Makefile.PL
> > > > > > > >          > $ make
> > > > > > > >          > $ make test
> > > > > > > >          > $ sudo make install
> > > > > > > >          > and then
> > > > > > > >          > $ sudo yum localinstall ledgersmb-1.3.29-1.noarch.rpm
> > > > > > > >          >
> > > > > > > >          > But still it's complaining there is no perl-Config-Std
> > > > > > > >          >
> > > > > > > >          > bummer... what now?
> > > > > > > >          >
> > > > > > > >          >
> > > > > > > >          > > Then delete that directory.
> > > > > > > >          > >
> > > > > > > >          > >
> > > > > > > >          > > Then
> > > > > > > >          > >
> > > > > > > >          > >
> > > > > > > >          > > PERL_MM_OPT=INSTALL_BASE=/usr/lib/perl5 cpan Config::Std
> > > > > > > >          > >
> > > > > > > >          > >
> > > > > > > >          > > and the rest.....
> > > > > > > >          > >
> > > > > > > >          > >
> > > > > > > >          > > Best wishes,
> > > > > > > >          > > Chris Travers
> > > > > > > >          > >
> > > > > > > >          > >         A 'regular' Fedora 18 rpm for perl-Config-Std
> > > > > > > >          doesn't show up
> > > > > > > >          > >         in Google.
> > > > > > > >          > >
> > > > > > > >          > >         Any hints?
> > > > > > > >          > >
> > > > > > > >          > >
> > > > > > > >          > >         thanks,
> > > > > > > >          > >         ario
> > > > > > > >          > >
> > > > > > > >          > >
> > > > > > > >          > >
> > > > > > > >          > >
> > > > > > > >          ------------------------------------------------------------------------------
> > > > > > > >          > >         Everyone hates slow websites. So do we.
> > > > > > > >          > >         Make your web apps faster with AppDynamics
> > > > > > > >          > >         Download AppDynamics Lite for free today:
> > > > > > > >          > >         http://p.sf.net/sfu/appdyn_d2d_jan
> > > > > > > >          > >         _______________________________________________
> > > > > > > >          > >         Ledger-smb-users mailing list
> > > > > > > >          > >         ..hidden..
> > > > > > > >          > >
> > > > > > > >          https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> > > > > > > >          > >
> > > > > > > >          > >
> > > > > > > >          ------------------------------------------------------------------------------
> > > > > > > >          > > Everyone hates slow websites. So do we.
> > > > > > > >          > > Make your web apps faster with AppDynamics
> > > > > > > >          > > Download AppDynamics Lite for free today:
> > > > > > > >          > > http://p.sf.net/sfu/appdyn_d2d_jan
> > > > > > > >          > > _______________________________________________
> > > > > > > >          Ledger-smb-users mailing list
> > > > > > > >          ..hidden..
> > > > > > > >          https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> > > > > > > >          >
> > > > > > > >          >
> > > > > > > >          >
> > > > > > > >          >
> > > > > > > >          ------------------------------------------------------------------------------
> > > > > > > >          > Everyone hates slow websites. So do we.
> > > > > > > >          > Make your web apps faster with AppDynamics
> > > > > > > >          > Download AppDynamics Lite for free today:
> > > > > > > >          > http://p.sf.net/sfu/appdyn_d2d_jan
> > > > > > > >          > _______________________________________________
> > > > > > > >          > Ledger-smb-users mailing list
> > > > > > > >          > ..hidden..
> > > > > > > >          >
> > > > > > > >          https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> > > > > > > >          
> > > > > > > >          
> > > > > > > >          
> > > > > > > >          ------------------------------------------------------------------------------
> > > > > > > >          Everyone hates slow websites. So do we.
> > > > > > > >          Make your web apps faster with AppDynamics
> > > > > > > >          Download AppDynamics Lite for free today:
> > > > > > > >          http://p.sf.net/sfu/appdyn_d2d_jan
> > > > > > > >          _______________________________________________
> > > > > > > >          Ledger-smb-users mailing list
> > > > > > > >          ..hidden..
> > > > > > > >          https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> > > > > > > >          
> > > > > > > > 
> > > > > > > > ------------------------------------------------------------------------------
> > > > > > > > Everyone hates slow websites. So do we.
> > > > > > > > Make your web apps faster with AppDynamics
> > > > > > > > Download AppDynamics Lite for free today:
> > > > > > > > http://p.sf.net/sfu/appdyn_d2d_jan
> > > > > > > > _______________________________________________ Ledger-smb-users mailing list ..hidden.. https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> > > > > > ------------------------------------------------------------------------------
> > > > > > Everyone hates slow websites. So do we.
> > > > > > Make your web apps faster with AppDynamics
> > > > > > Download AppDynamics Lite for free today:
> > > > > > http://p.sf.net/sfu/appdyn_d2d_jan
> > > > > > _______________________________________________
> > > > > > Ledger-smb-users mailing list
> > > > > > ..hidden..
> > > > > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> > > > > > 
> > > > > ------------------------------------------------------------------------------
> > > > > Everyone hates slow websites. So do we.
> > > > > Make your web apps faster with AppDynamics
> > > > > Download AppDynamics Lite for free today:
> > > > > http://p.sf.net/sfu/appdyn_d2d_jan
> > > > > _______________________________________________
> > > > > Ledger-smb-users mailing list
> > > > > ..hidden..
> > > > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> > > > 
> > > > ------------------------------------------------------------------------------
> > > > Everyone hates slow websites. So do we.
> > > > Make your web apps faster with AppDynamics
> > > > Download AppDynamics Lite for free today:
> > > > http://p.sf.net/sfu/appdyn_d2d_jan
> > > > _______________________________________________
> > > > Ledger-smb-users mailing list
> > > > ..hidden..
> > > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> > > > 
> > > ------------------------------------------------------------------------------
> > > Everyone hates slow websites. So do we.
> > > Make your web apps faster with AppDynamics
> > > Download AppDynamics Lite for free today:
> > > http://p.sf.net/sfu/appdyn_d2d_jan
> > > _______________________________________________ Ledger-smb-users mailing list ..hidden.. https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> > 
> > 
> > ------------------------------------------------------------------------------
> > Everyone hates slow websites. So do we.
> > Make your web apps faster with AppDynamics
> > Download AppDynamics Lite for free today:
> > http://p.sf.net/sfu/appdyn_d2d_jan
> > _______________________________________________
> > Ledger-smb-users mailing list
> > ..hidden..
> > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
> > 
> 
> ------------------------------------------------------------------------------
> Everyone hates slow websites. So do we.
> Make your web apps faster with AppDynamics
> Download AppDynamics Lite for free today:
> http://p.sf.net/sfu/appdyn_d2d_jan
> _______________________________________________ Ledger-smb-users mailing list ..hidden.. https://lists.sourceforge.net/lists/listinfo/ledger-smb-users



------------------------------------------------------------------------------
Free Next-Gen Firewall Hardware Offer
Buy your Sophos next-gen firewall before the end March 2013 
and get the hardware for free! Learn more.
http://p.sf.net/sfu/sophos-d2d-feb
_______________________________________________
Ledger-smb-users mailing list
..hidden..
https://lists.sourceforge.net/lists/listinfo/ledger-smb-users